Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
MX-5 NB FL mounting for licence plate mazda miata
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
manu schaf (manublacksheep)Description
Hier ein Kennzeichenhalter für den MX-5 NB FL. Ich denke, der passt auch beim NB. Es gibt zwei Möglichkeiten um den Halter zu montieren. 1. Per Schraube durch die Stoßstange. 2. Per Magnet. Hierfür könnt ihr Magnten mit einem Durchmesser von 15mm und einer Höhe von 5mm in die Vertiefungen einkleben. Danach klebt ihr im Inneren der Stoßstange ebenfalls die Magneten ein. Dann sollte der Halter per Magnet halten und wieder entnehmbar sein. Diese Variante habe ich aber noch nicht getestet. Freue mich aber über ein Feedback. Falls ihr den Halter modifizieren wollt, könnt ihr das gerne tun. Für diesen Fall habe ich auch eine STP mit hochgeladen:) Material: PLA Düse: 0,4mm Wandstärke: 2 Linien Schichtstärke: 0,3mm Füllung: 15% Support: Ja (für die Bohrungen) English: Here is a license plate holder for the MX-5 NB FL. I think it also fits to the NB. There are two ways to mount the holder. 1. by screw through the bumper. 2. by magnet. For this you can glue magnets with a diameter of 15mm and a height of 5mm in the recesses. Then glue the magnets inside the bumper as well. After that the holder should hold by magnet and be removable again. I have not tested this versionyet. But I am glad about a feedback. material: PLA nozzle: 0,4mm wall thickness: 2 lines linethickness: 0,3mm infill: 15% support: yes (for the holes) Translated with www.DeepL.com/Translator (free version).
Compatible Vehicles
Originally published on thingiverse.com by manu schaf (manublacksheep) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
