MB Fuel Cap tether (Tankdeckel Halteseil) - image

Files (3)

Oese.stl

STL

34.1 KB

Ring.stl

STL

1.5 MB

Seil.stl

STL

419.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 40%	100% solid	Recommendation
Oese.stl	Printable file	34.1 KB STL	Slice file	Slice file	Slice file	For the tether (Seil), TPU with a hardness of D56 or A95 is recommended for flexibility.
Ring.stl	Printable file	1.5 MB STL	Slice file	Slice file	Slice file	For the tether (Seil), TPU with a hardness of D56 or A95 is recommended for flexibility.
Seil.stl	Printable file	419.2 KB STL	Slice file	Slice file	Slice file	For the tether (Seil), TPU with a hardness of D56 or A95 is recommended for flexibility.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

MB Fuel Cap tether (Tankdeckel Halteseil)

0 downloads94 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Sicherungsband für viele Mercedes Tankdeckel. Passt zum Beispiel beim R171 Gedruckt wurde der Ring mit ASA, es sollte aber auch mit PLA kein Problem geben. Das Seil und die Oese wurden mit hartem (D56) TPU gedruckt. Vermutlich geht aber auch mit TPU Härte A95. Kommentar wäre super.