Files (2)

clips_mercedes_v1.stl

STL

29.2 KB

clips_mercedes_v2.stl

STL

38.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

10g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.25

Filament only at roughly $24/kg PETG / ASA

Print time

18m–29m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
clips_mercedes_v1.stl	Clip	29.2 KB STL	9g $0.21	10g $0.23	21g $0.51	Ensure proper fitment by checking the creator's print settings and dimensions on the source page
clips_mercedes_v2.stl	Clip	38.8 KB STL	10g $0.23	10g $0.25	23g $0.54	Ensure proper fitment by checking the creator's print settings and dimensions on the source page

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

mercedes benz 308 clips

0 downloads157 views0 likes

Shared by

Alfred

Verified

Description

clips. Catalog note: mercedes benz 308 clips is a 3D-printable car-part listing indexed for classified fitment Mercedes-Benz. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.