Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | TPU 20% | TPU 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MB W124 Fuel Cap Seal
Shared by
3DPrintedCarPartDescription
Fuel filler cap seal for a petrol W124 series Mercedes-Benz. Must be printed with flexible, petrol resistant filament - shore hardness 80-88A. TPU should be fine, as it has good resistance to gasoline. Tested and works OK. Modelled based on original, but 0.1mm thicker.
Compatible Cars
Originally published on thingiverse.com by Lucas (ptashek) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
AC Low Pressure Valve Cover
License: CC BY-NC-SA
View STL source
W124 cable harness clip
License: CC BY-NC-SA
View STL source
Mercedes 2015400282 Cap Hand Drawn Replacement - W124, W201, W126 etc
Mercedes-Benz
License: CC BY
View & download STL files
mercedes benz 308 clips
Mercedes-Benz
License: CC BY
View & download STL files
Mercedes Vito fuel cap tether
License: CC BY-NC
View STL source
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
