Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mercedes W114/115 Power Window Switch Bezel/Plate
Shared by
3DPrintedCarPartDescription
This is my attempt at modeling the center console bezel/panel/plate/mount that holds the power window switches in the '68-'76 Mercedes W114 & W115 cars. This part is NLA new, difficult to find used and frequently broken or cracked like mine was. Tagged as a work-in-progress because it's Pretty Close But Not Exact in a couple places and doesn't have the pebble-grain texture of the original. Added thickness in a few places for strength in the print. I'm printing prototypes to attempt to fine-tune the dimensions, but the texturing is beyond me right now so you're on your own. Wrap it in vinyl if it really bothers you. Be gentle, this is my first 3D model based on an actual object and created from scratch, and I'm also a complete n00b at Fusion 360. Model is upside down; printing with the "bottom" up will give a better finish on the visible areas, but will require a lot of support material. zip file contains STL, STEP and F3D formats.
Compatible Cars
Originally published on thingiverse.com by Harold Sullivan (tristessa) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
