Miata Air Filter Adapter - AFM Delete - image

Files (1)

miata_intake_maf_delete.stl

STL

920.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS 20%	ABS 40%	100% solid	Recommendation
miata_intake_maf_delete.stl	Primary model	920.5 KB STL	Slice file	Slice file	Slice file	Print with supports for the mounting bracket as recommended

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Miata Air Filter Adapter - AFM Delete

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

An air filter adapter for use when removing the air flow meter in your 90-93 Miata. Used when switching to Megasquirt ECU or other speed density system. Designed for a 3" air filter. Has a hole for mounting GM style intake temp sensor. Mounting bracket on the side. Recommended that you print with support for the mounting bracket. Print in ABS due to engine bay temperature.