Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ASA / ABS 20% | ASA / ABS 50% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Miata License Plate Relocation
Shared by
3DPrintedCarPartDescription
Seeing my license plate blocking the miata smile ticks me off. So I had to relocate the plate. Designed based on the included tow hook thread and diameter. You will need: - x1 100mm M6 Bolt - x1 30mm M6 Spacer Need to be printed using ABS with 50% infill Installation: 1. Pop in the spacer to the 3D printed part and screw in the M6 bolt 2. Pop out the tow hook cover on the miata (don't lose it, keep it) 3. Screw in the 3D printed part and tighten using a 24mm socket / wrench 4. And done.
Compatible Cars
Originally published on thingiverse.com by dri ss (dri_23) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
