Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| brads_miata_magsafe_plate.stl | Primary model | 11.5 MB STL | Slice file | Slice file | Slice file | Ensure a secure fit by applying double-sided tape to the bottom of the holder |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Miata MX-5 Magsafe Cubby phone charger holder
Shared by
3DPrintedCarPartDescription
Designed this for a Mazda Miata MX-5 (NC) cubby hole on the driver left side. It fits really well but may want to double side tape it down so it doesn't pop out ever or come with your phone. Designed it to where you will drill a hole in the back of cubby for the cable to go through. The phone BARELY fits width wise in that cubby, and may slightly stick out of the cubby length wise. If you have a fat case you may not fit in there. The cutout on top right is for camera bump magsafe that will fit is the latest one, whatever that one is called. Maybe the old ones too but I don't have those dimensions.
Compatible Cars
Originally published on thingiverse.com by Adam Richards (abombdesigns) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
