Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Miata NA flow restrictor
Shared by
3DPrintedCarPartDescription
This is a flow restrictor that normally resides between the valve cover and chrome tube. If you replaced the hose due to age, and didn't swap over the restrictor, you probably need this. Not sure if this restrictor is on the latter cars or not. It will affect your idle, so make sure to do the TEN and GND and set base idle again after installing. If you have been experiencing the dreaded idle droop, this is a good first place to look.
Compatible Cars
Originally published on thingiverse.com by jeff greenfield (underthetire) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
