Files (1)

MiataWindowRegulatorClip.stl

STL

248.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
MiataWindowRegulatorClip.stl	Clip	248.3 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment before gluing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Miata Window Regulator Clip

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Accidentally broke the little clips on my window regulator when I was taking it apart. Printed this to slot in and hold the cable guide in place like the clips did. Seemed to snap in for me, but I still put some rubber glue in there to make sure it didn't fall out. I printed it in PETG, but ABS would have probably been better.