Mini Cooper front speaker adapter 165mm - image

Files (1)

MiniCooper_SpeakerFront165mmAdapter.stl

STL

1.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MiniCooper_SpeakerFront165mmAdapter.stl	Primary model	1.8 MB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Mini Cooper front speaker adapter 165mm

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Front door speaker adapter rings for Mini Cooper R50, R52, R54. This adapter will mount a 165mm speaker in all 1st Gen Mini Coopers. I decided to create this model after spending endless time searching the internet for a similar item. Many speaker adapters exist on this site and elsewhere but none seem to be designed for a Mini Cooper. The model was created such that the shape matches the original as closely as possible and the result fits perfectly in my car. The speakers that I mounted are JBL GX600C. Make sure you use foam sealing gaskets on both ends of the adapter to ensure a perfect seal between door and speaker. For the gasket between the door and my adapter I re-used the factory gasket that was behind my Harman Kardon speakers I replaced. For the gasket between adapter and new speakers I used the one that came with my JBL GX600C. A gasket with inner diameter 144mm and outer diameter 166mm would work perfectly on both ends.