Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| MitsubishiChargerHolder.stl | Mount / bracket | 210.8 KB STL | Slice file | Slice file | Slice file | Ensure a stable print bed for optimal results |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mitsubishi Outlander Charger holder
Shared by
3DPrintedCarPartDescription
Hello! This is my first upload to Thingiverse! We used to just drop our charger on the ground but that caused it to get pretty gross over time! so here is a little holder we made that you can just drill into any wall with some wall plugs and 4mm screws... Feel free to customize it as much as you want to fit your charger. It currently fits a Mitsubishi outlander PHEV 240v wall plug thing, but could most likely hold others aswell! If you find your charger is slipping out of it, i suggest putting some form of rubber in the cradle to keep it stuck there nicely! This holder is also quite useful to loop the cable around to keep it off the ground! Happy printing!
Compatible Cars
Originally published on thingiverse.com by Seamus Clarke (FatLizard) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
