Mk1 Ford Focus Washer Bottle tab - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mk1 Ford Focus Washer Bottle tab

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This tab was made for a RHD Mk1 Ford Focus windscreen washer bottle. The original on the car I was repairing for a friend was missing the hook section and a replacement from from the wrecking yard was also broken so I didn't know how this was originally shaped. Bottle removal should be done by removing the mounting screws, removing the filler neck from inside the engine bay and then sliding the bottle about 2cm to the left to disengage this fragile clip. It appears this is often broken by people pulling the bottle straight out. The washer bottle can be mounted without this clip but this does allow the bottle to sit in place while the mounting screws are fitted. This design was tweaked after test fitting and fits nicely.