Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 38% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MK2 Ford Fiesta Window Winder Replacement
Shared by
3DPrintedCarPartDescription
These are replacement MK2 Ford Fiesta Window Winders with the rotating knob printed in place. It should easily rotate with a bit of persuasion after printing. Two versions are available + With supports + Without supports The version without supports is a flatter design that is probably not as strong, once fitted, as the version that requires supports. See the pictures to see what I mean. The winder fits perfectly on my 1986 Fiesta Popular Plus as in the pictures. For the non support version I used these settings: + PLA @ 210c + 0.2mm Layer Height + No supports / brim + 25% infill For the support version I used these settings: + PLA @ 210c + 0.2mm Layer Height + small brim and supports + 25% infill.
Compatible Cars
Originally published on thingiverse.com by Aaron Neal (aaronneal) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
