Mk6 Ford Fiesta Underbody Brake and Fuel Line retaining clips - image

Files (1)

WQ_Underbody_Fuel_and_Brake_Line_Clip_v0.1-ASSEMBLY.stl

STL

4.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
WQ_Underbody_Fuel_and_Brake_Line_Clip_v0.1-ASSEMBLY.stl	Clip	4.9 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mk6 Ford Fiesta Underbody Brake and Fuel Line retaining clips

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This part was developed using FreeCAD. It is a redrawn approximation of the original piece. The reason for it being CAD drawn rather than scanned, is that I have a project car, and am one day intending to replace the fuel line with AN lines, so would like to draw up a custom clip that still works with the Carbon breather line and brake lines in the future. I noticed that there's an unused clip in the Australian XR4/ST150, so this is likely to work with other models like the 1.6 or the diesels with the return line to the tank. Printing the clip in PLA it is probably a bit too brittle and inflexible for the lines to be inserted. I would recommend PETG at least. Hopefully that will also make it tolerate the underbody heat from the exhaust. Whilst I can confirm it fits, I have not actually run this on a road car for any length of time yet. https://www.youtube.com/watch?v=wI4_CF4Yb40