Files (2)

Plate_Mount_backplate_3.STL

STL

131.3 KB

Plate_Mount_frontplate_3.STL

STL

607.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Plate_Mount_backplate_3.STL	Mount / bracket	131.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports
Plate_Mount_frontplate_3.STL	Mount / bracket	607.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Grilles

MK7.5 Golf R front plate mount

0 downloads104 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Front plate mount for 2018+ Golf R (might work with other models but didnt verify, let me know if you do confirm it working on any other model like GTI/TSI). Version description: V3 - USA and Canadian plates - is similar to the old V2 but with a larger backplate to capture multiple horizontal fins of the grill and also more holes to capture odd plates like the NC ones that seem to be different than others. Here is an album that shows how it is installed and mounted: https://imgur.com/a/DNJpk NOTE 1: The hardware I used: - 4pcs: #8-15 x 2-1/2" Square Drive Flat Head Grade 18-8 Type A Point Stainless Steel Sheet Metal Screw - 4pcs: #8-15 x 1/2" Square Drive Flat Head Zinc Finish Type A Point Steel Sheet Metal Screw - 4pcs: # 8 Nickel Plated Finishing Washer NOTE 2: if you have ideas for improving this, let me know NOTE 3: If you are interested in an aluminum plate mount, check out my instagram page @novustech or website www.novustech.ca.