VW Golf MK3 Front Grill clip repair - image

Files (1)

GOLF_MK3_Front_grill_clip_fix.stl

STL

546.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
GOLF_MK3_Front_grill_clip_fix.stl	Clip	546.4 KB STL	Slice file	Slice file	Slice file	Sand or iron out the layers to smooth the surface after printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Grilles

VW Golf MK3 Front Grill clip repair

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

With this design you will be able to fix quite common broken clip problem with MK3 front grill (1HG6853655) You definitely need to sand or iron out the layers with soldering iron to smooth the surface. There is some extra thinkness on the model for that I used 0.2mm layer and ASA to print as the grill was also made from ASA but ABS would do just fine also.