Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mokka DIY - Central Air Vents Phone Support - iPhone 7
Shared by
3DPrintedCarPartDescription
Due to the fact that I recently change car, and to the fact that I bought a Opel / Vauxhall Mokka without the integrated Navi system ( No money, no Honey... ), I had to solve the problem of how to install my iPhone on the Dashboard for use it as Navi. The phone had to be placed in a quite accesiible position, and without modifications to the dashboard ( I could have used a suction cup support installed the windshield, but... If that, what is the point to have a 3D printer??? ). So I start think about the "clip" system, using some edges present on the central air vents of the car. This is my first functioning prototype... now, few days of road test, and I will share the stl files updated with the last improvements. Update of 05/08/2018 Seems to be everything ok, the support is holding correctly the phone, so I release the STL files! Any critic/comment will be appreciated! Hope you enjoy!
Compatible Cars
Originally published on thingiverse.com by Cornelius Cool (Cornely_Cool) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
