Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| truck_mount_may_1.stl | Mount / bracket | 374.1 KB STL | Slice file | Slice file | Slice file | Print with the phone part on the bed for optimal adhesion and stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mounting in a 2011 Ford Expedition or Lincoln Navigator for a Moto Z Force Droid 2 and 100mm wireless (Qi) charger base.
Shared by
3DPrintedCarPartDescription
Worked long and hard on this and will update as I refine it but now it fits well and I like the positioning. I have no idea what other vehicles this will fit on. There's probably trim levels that make it not fit. This mounted above the AC vent to the left of the radio pack. The lower curve fits in the top of the AC vent. The upper bracket goes onto the small rack on top of the dash. There is a little inset for velcro, which is required as there is no way to make this bracket hold on its own. Print it with the phone part on the bed, then use supports all over.
Compatible Cars
Originally published on thingiverse.com by Ryan Ritenour (Goofy173) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
