Files (1)

MR2_-_engine_hood_rod_clip.stl

STL

129.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
MR2_-_engine_hood_rod_clip.stl	Clip	129.9 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

MR2 - engine hood rod clip

1 downloads99 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a spare part for your Toyota MR2. The design of this clip is similair to the original one. Use only material with a glas transition temperature of over 100°C / 212°F like ABS! Otherwise you will lose the pretension inside clip and your rod won´t be hold by the clip! Have fun!