MR2 Spyder no-drill license plate holder - image

Files (2)

LicensePlateOval.stl

STL

75.3 KB

LicensePlatePlateInside.stl

STL

41.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
LicensePlateOval.stl	Printable file	75.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
LicensePlatePlateInside.stl	Printable file	41.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

MR2 Spyder no-drill license plate holder

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I hate to drill into my car for something as ugly as a license plate. I also hate getting pulled over for not having front plates. I tried mounting my plates inside the front grille, but the A/C (believe it or not) performs really badly when you block that much of the grille. So I created this mount that reaches through the front plastic grille and bolts securely onto the radiator frame. It holds more than half the plate below the grille, and the A/C works really well now. It has held up well to weather, "highway speeds", and even a few run-ins with tall parking blocks without breaking. You'll have to add your own 1/4-inch long bolts for attaching the oval to the inside bracket, and a few small 1/4 inch bolts and nuts to hold the bracket to the radiator frame. Finally, you also need to add an aftermarket license plate holder. Mine was a "Front Bumper Tow Hook License Plate Mounting Bracket Relocate Holder for BMW" sold by: Acepath USA on Amazon.com.