MX-5 NC air vent phone mount adapter - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

MX-5 NC air vent phone mount adapter

0 downloads30 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The ball fits BlitzWolf BW-MH1 phone holder. The ball is so far right caouse of whiper switch proximity. Print with materials capable to survive in hot car interior. PLA not recommended - it will require retightening from time to time - PLA slowly deforms under pressure (anybody knows this phenomenon name?) When printing mounting teeth, print nut-side down, stop after 5mm to insert nut, insert nut, continue. Requires: M3x10 - for ball mount 2x M4x30 2x M4 nut.