Navigation Mount using Ashtray NSX part - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Navigation Mount using Ashtray NSX part

0 downloads44 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This uses the ashtray mount to provide a very stable mount for your Garmin GPS that you can reach since the windshield is so far away. Attachments included for both the ~45 mm circular mount or the 17 mm spherical ball mount. Printed in orange for pics - the mount is not visible when installed and in use so you can use any color. Original Honda/Acura part: 77710-SL0-A01 Note: different GPS units have different relative positions of the mounting point, so be sure to check compatibility with the shifter for your unit. This was designed around the Garmin DriveSmart 65 MT. Use PETG, or ABS if you leave your car in the sun. User is responsible for determining suitability for purpose. Remove your ashtray. Mount your GPS to this mount and then push it into the ashtray slot. To remove, push up on the ashtray cover and this mount will release.