Files (2)

Antenna_Nut.STL

STL

435.1 KB

Antenna_Plug.STL

STL

501.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Antenna_Nut.STL	Printable file	435.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Antenna_Plug.STL	Printable file	501.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

NB Miata Antenna Delete Plug

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Antenna Plug and Locknut for an NB Mazda Miata. The hole in the rear left quarter panel (on the '99-'00 for sure, cannot confirm on NB2 cars) is about 1" diameter. This plug is a.25" tall protrusion, and has a groove for a #119 o-ring for sealing against the fender face. Solidworks 2021 files are also included if you need to make modifications.

Compatible Cars

Mazda MX-5

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Steven Nelson (SNelson910) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files