Files (1)

NB_Miata_Dash_Mount.stl

STL

569.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS 20%	ABS 25%	100% solid	Recommendation
NB_Miata_Dash_Mount.stl	Mount / bracket	569.5 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

NB Miata Dash Mount

0 downloads116 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I highly recommend you print this in ABS. On my black dash in the sun, it gets hot enough that PETG starts to sag and warp. This is a dash mount I designed to go with a phone holder I designed for Autocross events. I have attached it to the dash using some of the 30lb Double sided 3M tape to make sure it will not go anywhere. link: https://smile.amazon.com/3M-Scotch-Extreme-Mounting-60-Inch/dp/B005SRECEU/ I have uploaded the latest version, This one has been in my car for 4 or 5 months now with no issues. The fit is good and I have been using it to mount my OnePlus 6 phone on the dash at Autocross events and just everyday driving.