Nissan brake pedal rubber stopper pad - image

Files (2)

Nissan_Brake_Pedal_Stop_Pad.stl

STL

267.3 KB

Nissan_Brake_Pedal_Stop_Pad_slit.stl

STL

271.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

21g

Based on 35% main infill for the largest likely-needed model file

Material cost

$0.51

Filament only at roughly $24/kg PETG / a hard rubber flexible filament like TPU

Print time

36m–1.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / a hard rubber flexible filament like TPU 20%	PETG / a hard rubber flexible filament like TPU 35%	100% solid	Recommendation
Nissan_Brake_Pedal_Stop_Pad.stl	Printable file	267.3 KB STL	17g $0.40	21g $0.51	40g $0.96	For a more flexible print, use the slit version with PLA, but PETG or TPU is preferred for durability and heat resistance.
Nissan_Brake_Pedal_Stop_Pad_slit.stl	Printable file	271.5 KB STL	17g $0.41	21g $0.51	40g $0.97	For a more flexible print, use the slit version with PLA, but PETG or TPU is preferred for durability and heat resistance.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan brake pedal rubber stopper pad

0 downloads78 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

If your Nissan has its brake lights on all the time or the cruse control doesn't work or clutch pedal switch doesn't work. then you probably have a broken pad on the brake/clutch pedal assembly. Replicated the OEM brake pedal rubber-stopper that triggers the brake light switch. This will also work for clutch pedal too. $12-18 your local dealer current OEM pad PN: 46512-H0101 discontinued OEM pad PN: 46584-5P010 $7.99 for Dorman Brake Pedal Pad 74015 at autozone or pennies 3d printing it yourself. I'm including two models. One is the exact as OEM which can be printed on petg or any type of hard rubber flexible filament. the Slit version has a cut in the middle so if you print with PLA, it should bend a bit to be installed correctly.