Nissan / Infiniti oil fill funnel - image

Files (1)

Vented_Funnel_Nissan_Infiniti_Filler_v2.stl

STL

1.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Vented_Funnel_Nissan_Infiniti_Filler_v2.stl	Primary model	1.3 MB STL	46g $1.10	50g $1.20	110g $2.63	Print with the funnel's opening facing upwards for minimal supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Nissan / Infiniti oil fill funnel

1 downloads222 views0 likes

Shared by

Michael Chen

Verified

Description

Yet another funnel :) This one is short, vented to make filling painless and no mess. It screws right in to the oil cap slot so it wont come out or tip over. Its made for nissan / infiniti and I use it on my Q50. May fit other makes, but not sure. Check out my other funnels too. If you download it, please 'like' it, Ill keep making stuff. If you have any suggestions that you need let me know. I printed it upright as shown so needed minimal supports.