Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Nissan Side Vents

0 downloads72 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement vent trim ring for the Nissan D21 (aka Navarre, Patrol, also fits Pathfinder) 1988 - 1993 side vents with damper knob. It should require minimal tweaking depending what shape your louvre (working on it) and duct is in. Also, it is somewhat of a snug fit depending on your dash. If you don't have a damper, then you can use Bluekullbird's Thing. https://www.thingiverse.com/thing:300435