Nissan Versa Note Radio Knob Insert - image

Files (1)

Nissan_Versa_Note_Radio_Knob_Insert.stl

STL

26.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Nissan_Versa_Note_Radio_Knob_Insert.stl	Primary model	26.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Nissan Versa Note Radio Knob Insert

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The knobs on my Nissan Versa Note radio consist of three parts. There is a black part that actually connects to the shaft and turns it. There is a chrome piece that goes on top of that, and then there is a black disk that goes on top and has hooks that push through to the bottom piece to hold all three pieces together. One of mine was missing the top piece, so I built it and printed it. The last two pictures show mine and the original look on another knob. Not perfect, but much better than the blank black knob in the first picture.