Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| nissan_versa_gear_shift_v2.stl | Primary model | 321.3 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit by verifying the 10mm slot diameter matches the metal stick |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Nissan Versa / Tiida gear shift knob (manual)
Shared by
3DPrintedCarPartDescription
A knob of the shifter ofa nissan versa 2007-2011 also fits a nissan tiida, the slot diameter is 10mm. At version 2 it now partially hides the reverse trigger. Printed at.1 mm 20% infill with supports, then it was wet sanded, painted and clear coated. In order to remove the knob you need to pull very hard, the original knob has three layers, you must remove all of them until you see the the metal stick that measures 10mm.
Compatible Cars
Originally published on thingiverse.com by daniel aguilar (dafsofware) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
