Noise Generator Delete Plug for Mini Cooper vehicle - image

Files (1)

Noise_Generator_Plug.stl

STL

179.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Noise_Generator_Plug.stl	Primary model	179.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Noise Generator Delete Plug for Mini Cooper vehicle

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Wanted to clean up the engine bay of my R55s a bit, and decided I wanted to ditch the noise generator, and couldn't find a suitable plug available. Cut the OEM hose, insert plug, use worm drive clamp from other part of noise generator hose. Holds under full boost, I for see no problems with this plug in the future. No additional hardware needed. I recommend PTEG, as it seems to be resistant to oil, and this plug will come in contact with oil. I will be posting all parts that I make as I find things that my mini needs.