Files (1)

Corsa_bonnet_clip_remastered2.stl

STL

218.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Corsa_bonnet_clip_remastered2.stl	Clip	218.6 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

Opel Corsa C bonnet stay clip

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I modified the part from this link https://www.thingiverse.com/thing:2006531 because it did not hold me properly and had weak points, which I reinforced and thus came closer to the shape of the original holder. PETG nozzle: 0.4 resolution: 0.2 perimeters: 3 infill: honeycomb This is a remix from https://www.thingiverse.com/thing:2006531