Opel Tigra A skirt holder Rear (RH) - image

Files (1)

after_mesh.stl

STL

12.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
after_mesh.stl	Primary model	12.4 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Side Skirts

Opel Tigra A skirt holder Rear (RH)

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Scanned from original model. Serial Number 90 481 356. Catalog note: Opel Tigra A skirt holder Rear (RH) is a 3D-printable car-part listing indexed for classified fitment Opel Tigra A. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.