Panther body front air suspension adapter - image

Files (8)

Bag_Plate_FL.stl

STL

48.7 KB

Bag_Plate_FL2.stl

STL

49.3 KB

Lower_Strut_Plate_v4.stl

STL

100.5 KB

Upper_Bag_Plate.stl

STL

84.8 KB

Upper_Bag_Plate_B1.stl

STL

3.0 KB

Upper_Bag_Plate_FU2.stl

STL

60.6 KB

Upper_Bag_Plate_S1.stl

STL

5.9 KB

Upper_Strut_plate_v2.stl

STL

167.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

8 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
Bag_Plate_FL.stl	Printable file	48.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Bag_Plate_FL2.stl	Printable file	49.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Lower_Strut_Plate_v4.stl	Printable file	100.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Upper_Bag_Plate.stl	Printable file	84.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Upper_Bag_Plate_B1.stl	Accessory piece	3.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Upper_Bag_Plate_FU2.stl	Printable file	60.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
Upper_Bag_Plate_S1.stl	Accessory piece	5.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Upper_Strut_plate_v2.stl	Printable file	167.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Panther body front air suspension adapter

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Adapters to allow installation of 2500 or 2600 series air bags in place of coil over struts on a ford panther body car..DXF included for plasma table use. Material used should be 1/4' mild steel.

Compatible Cars

Ford Crown

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Robert Klotz (Robs_Garage) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.