Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| papagof15_v1.stl | Primary model | 166.8 KB STL | Slice file | Slice file | Slice file | Ensure a strong bond between the adapter and the factory GoPro mount. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Papago! F15 dash camera GoPro Mount Adapter for Toyota Tacoma
Shared by
3DPrintedCarPartDescription
Adapter to use the Papago! F15 dash camera on the factory GoPro mount to the right of the rearview mirror. The Papago is available around $30 and doesn't leave an expensive gopro sitting on your dash when you're not in the vehicle. You can also wire it into your overhead console for power using this mini-USB kit from Amazon (https://www.amazon.com/dp/B00MH4ZVHO) following this writeup https://www.tacomaworld.com/threads/overhead-cluster-12v-constant-and-ignition-switched-power-pin-outs.512640/ Looks like the F15 is also marketed as the GOSAFE 350MINI DASH CAMERA.
Compatible Cars
Originally published on thingiverse.com by Mike Frame (Mframe) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
