Files (1)

Peugeot_208.stl

STL

157.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 35%	100% solid	Recommendation
Peugeot_208.stl	Primary model	157.0 KB STL	Slice file	Slice file	Slice file	Print with the open side facing down to minimize support needs

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Peugeot 208 wheel cap

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hello, This is a wheel cap for the Peugeot 208. I didn't place logo on it, so it differs from the original one, but it is simpler to print - I've just flipped the model upside down and printed it without any support. After printing I've sticked an alloy tape on the front side of the model. I think that a silver spray will also do the job. I recommend to use either PET-G (as I did) or ABS. PLA won't work here. Cheers!