Soporte_Temp_Coche_v3.STL

STL

359.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Soporte_Temp_Coche_v3.STL	Primary model	359.5 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Temperature Car holder peugeot 208

0 downloads76 views0 likes

Shared by

Verified

Description

This is a car holder for temperature measurement, in my case I used in my car for measure the temperature inside of the car. The Digital Thermometer that I bought in Aliexpress is this one: https://www.aliexpress.com/item/Suction-Cup-LCD-Car-Digital-Thermometer-Transparent-Auto-Window-Thermometer-Celsius-Fahrenheit-12V-Car-Accessories-Car/32905140272.html?spm=a2g0s.9042311.0.0.27424c4dzzFBmH After printing I recommend the annealed treatment of the piece because I could measured 45ºC in very hot sunny day and It was affected resulting in a deformation of the piece. I recommend this video for the treatment https://www.youtube.com/watch?v=vLrISrkg46g For any comment or change in the measure of the model just send me a message.