Files (4)

Bok.stl

STL

995.6 KB

Sciana.stl

STL

405.6 KB

ScianaF.stl

STL

279.4 KB

Wspornik.stl

STL

5.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
Bok.stl	Printable file	995.6 KB STL	Slice file	Slice file	Slice file	Print the side arm twice, once normally and once mirrored, to create left and right parts.
Sciana.stl	Printable file	405.6 KB STL	Slice file	Slice file	Slice file	Print the side arm twice, once normally and once mirrored, to create left and right parts.
ScianaF.stl	Printable file	279.4 KB STL	Slice file	Slice file	Slice file	Print the side arm twice, once normally and once mirrored, to create left and right parts.
Wspornik.stl	Printable file	5.3 MB STL	Slice file	Slice file	Slice file	Print the side arm twice, once normally and once mirrored, to create left and right parts.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone holder Ampera

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The holder consist of: 1. The bracket for Airvent for Opel Ampera or Chevy VOLT (hard support in STL-need not supporting during printing) 2. Side arm- Left (right print as mirror) 3. Wall bottom 4. Wall front 5. Spring (can be printed or cut from any 0,3-0,5mm thk flexible plastic. The spring insert need to be cut as long as you need due to your phone/preferences. Enjoy with phones from 69-82mm wide. You have full access from bottom, the usb cable holder and ballpen holder behind phone set. Preferable material PetG or ABS, PLA may take loose during summer if cooling by the airvent!!!