Files (1)

handyhalter.stl

STL

174.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 60%	100% solid	Recommendation
handyhalter.stl	Primary model	174.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone holder AUDI A3 8P

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have constructed a cell phone holder for my Audi A3 8P. It is based on the following product from Amazon, which unfortunately does not fit. However, the magnet and the ball head from that product were reused here. I recommend PETG with min. 60% infill. Thus, the holder also passes the endurance test at 50 ° C in the interior without losing too much stiffness. Mount from Amazon: https://www.amazon.de/gp/product/B07YG2C6TY/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 (not an affiliate link - I don't earn anything).