Files (3)

phone_holder_v3_p1.stl

STL

1.7 MB

phone_holder_v3_p2.stl

STL

318.9 KB

phone_holder_v3_p3.stl

STL

186.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
phone_holder_v3_p1.stl	Mount / bracket	1.7 MB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports
phone_holder_v3_p2.stl	Mount / bracket	318.9 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports
phone_holder_v3_p3.stl	Mount / bracket	186.1 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone holder (megane4)

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A phone holder is a must. Also when you have r-link, its a must too for me to connect it as soon as get in the car. So I designed a cable attached phone holder. Thus, whenever I put my phone in the case, its pluged on the r-link as well. By the way, I strongly recommend to use heat resist materials to print it. BR.