Files (2)

Full.STL

STL

92.5 KB

Hollow.STL

STL

116.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Full.STL	Printable file	92.5 KB STL	Slice file	Slice file	Slice file	Print with the flat side down to minimize supports
Hollow.STL	Printable file	116.3 KB STL	Slice file	Slice file	Slice file	Print with the flat side down to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Renault Megane IV phone holder

1 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I didn't want to use permanent glue or to drill holes in my dashboard, so I made this. The flat profile follows the storage compartment's outline and blends with it. If printed black, it's almost invisible. I fitted an old universal joint with a magnetic phone holder, which I glued to the round hole on the top. The profile fits snuggly into the storage compartments so it effectively supports itself. Then a soft double-sided tape can be used to secure it firmly in place. * I used the hollow version in order to save material and printing time. It fits great and works like a charm. I have no data on how the full version looks like in real life *