Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Shiny_Hillar.stl | Primary model | 504.5 KB STL | Slice file | Slice file | Slice file | Print with the opening facing downwards to minimize support material if needed |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Pico Squeeze 2 Mod for BMW Cup Holder
Shared by
3DPrintedCarPartDescription
Das ist mein selbstentwickelter Mod für die jenigen wenigen, die den Eleaf Pico Squeeze 2 nutzen und zufällig auch noch einen E46/E39 fahren. ich habe für den originalen Getränkehalter einen Adapter gebastelt, um die Dampfe dort hineinstellen zu können, ohen dass diese umfällt. Eventuell passt er auch in andere Fahrzeuge, das kann ich aber nicht bestätigen. Der untere Durchmesser beträgt 72mm, der obere 84mm. Wichtig ist, dass ihr das Modell auf dem Kopf stehend druckt, wenn ihr keinen Support drucken wollt. __________ This is my self designed Mod for all Vapers with an E39 or E46 BMW and the Eleaf Pico Squeeze 2 Mod. I have designed an adapter for the original cup holder, to put the Vape in it, without falling over. Maybe this is fitting into other cars, but this isn't tested. The Diameter in the bottom is 72mm and the diameter in the top 84mm. Its important to print it headover when you dont want to print with support.
Compatible Cars
Originally published on thingiverse.com by Marcel Kleiner (kleinerkleiner29) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
