Porsche 911 SC 91157101700 Klappe für Lüftung, flap for blower - image

Files (1)

911_SC_Luftklappe_91157101700_v.3.stl

STL

61.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
911_SC_Luftklappe_91157101700_v.3.stl	Primary model	61.2 KB STL	Slice file	Slice file	Slice file	Print with the flat side down to minimize warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Porsche 911 SC 91157101700 Klappe für Lüftung, flap for blower

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a sparepart for Porsche 911 SC (g-Modell, 930) fresh air blower (Partnumber 91157101700). The former owner of my Porsche manipulated the ventilation and removed or lost one of the flaps in the fresh air blower housing. Printing: No support needed. Switch it to the flat side before printing. It may be necessary to scale the flap in x and y, depends on your printer. I used a 4mm foam rubber to seal the air stream. I used PETG because of high tempurature while heating.