Porsche 928 blank switch for console - image

Files (1)

928_switch_cover-2.stl

STL

103.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
928_switch_cover-2.stl	Cover / cap	103.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Porsche 928 blank switch for console

0 downloads57 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Porsche 928 center console switch blank I hooked up a switch in blank spot on center console (didn't want to drill stock blank) for the antenna - didn't want it going up every time the radio is on. I have a porsche classic radio that can use sd cards and phone so no antenna needed for those.