Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| rav4logorad.stl | Primary model | 863.0 KB STL | Slice file | Slice file | Slice file | Scale the model to 160mm wide and 25mm high before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
RAD4 - RAV4 Badge Emblem Toyota
Shared by
3DPrintedCarPartDescription
Just a dorky mod to make your RAV4 more RADical!! Need to scale when imported. Size to 160mm wide and 25mm high. I sat the print into the bed -4.5mm to make it thinner/closer to the original badge size.
Compatible Cars
Originally published on thingiverse.com by jay tee (mae7) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
RAV4 (2000-2005) VIN number cover
License: CC BY
View & download STL files
TOYOTA Center Cap
License: CC BY-SA
View & download STL files
Rav4 Steel Wheel Center Cap
License: CC BY-NC
View STL source
Toyota Yaris Cap
License: CC BY-SA
View & download STL files
Toyota Land Cruiser BJ70 Grille Emblem
License: CC BY-NC-SA
View STL source
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
