Files (2)

MG_Radio_Blank_Clamp_Plate_v1.stl

STL

16.9 KB

MG_Radio_Blank_v2.stl

STL

57.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MG_Radio_Blank_Clamp_Plate_v1.stl	Accessory piece	16.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
MG_Radio_Blank_v2.stl	Printable file	57.9 KB STL	Slice file	Slice file	Slice file	Ensure the bolt epoxy attachment point is strong enough for the Bluetooth module's weight

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Radio Blanking Plate (MG)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I was looking for an inexpensive way to fill in the radio hole in my MGB. This seems to fit nicely and has the MG logo. It took a couple tries to get the dimensions right. I may try to use paint to highlight the logo and frame to make it stand out more. I have used this plate to mount a $12 Bluetooth module to provide a low-cost radio for my car. This is my first Thingiverse upload, so I'd be interested in any feedback. A bolt is epoxied to the back of the plate to provide a mounting fastener. I'd like to have made this more elegant, but didn't want to add layers to the print. Print Time on my Creality Ender 3-V2 is 4 hrs, 23 minutes.