Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Radio_spacer.stl | Primary model | 1.6 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Radio Din spacer for VW Vanagon
Shared by
3DPrintedCarPartDescription
Most radios when installed in a Vanagon will bottom out on the heater plenum before seating properly. I made this spacer for mine to give enough room for the radio to seat in the bezel properly.
Compatible Cars
Originally published on thingiverse.com by Joe Bisson (myyellowminicooper) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Vanagon Dash blank
License: CC BY
View & download STL files
Vanagon / VW T3 Odometer repair kit
License: CC BY
View & download STL files
Vanagon Clock Blanking Plate
License: CC BY
View & download STL files
VW T3/Vanagon Phone Stand
License: CC BY-NC
View STL source
Emplacement tableau de bort VW Transporter T5
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
