Files (1)

Vanagon_Clock_Blanking_Plate.stl

STL

37.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Vanagon_Clock_Blanking_Plate.stl	Primary model	37.0 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Vanagon Clock Blanking Plate

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This will allow you to put whatever you want where the clock used to be, namely another clock, with some double sided sticky or velcro. It'll pop into the clock hole once you remove the clock, since that's probably broken by now. If you wanna remove the blanking plate I think you'll need to remove the dash, otherwise the dash might crack from too much prying. If you decide to print it in TPU, which could probably work, then go ahead and post it if you care to show.