Files (1)

radio.stl

STL

332.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
radio.stl	Primary model	332.4 KB STL	Slice file	Slice file	Slice file	Print with the radio insert's mounting points facing upwards for optimal strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

radio insert

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed a way to securely install a single DIN pioneer radio in my 1987 ford ranger since the original radio was missing. It will fit on the ender 3 bed if you put it horizontal with no skirt, raft or brim. it is designed specially for my truck, but may have other uses.