RAM 1500 business card cup holder preview

Files (1)

ram_business_card_cup3.stl

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ram_business_card_cup3.stl	Primary model	1.2 MB STL	Slice file	Slice file	Slice file	Print with the cup bottom down to minimize supports and ensure a stable base

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

RAM 1500 business card cup holder

0 downloads23 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability and heat resistance

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between weight and stability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I saw ZRs remix and thought I could do the same to get back a cup holder that is used by my phone holder. With two people in the front with drinks, we had to use the door holders. Now we have more flexibility moving things around. Its a tight fit, but it needs to be to hold the weight. Printed in PETG, cup bottom down with supports under the part the fits in the card holder. Some might want to make cup walls thicker, but so far so good.